Cat flaps let your cat go inside and out whenever they want without having to let them in or out. They can also help prevent your cat from peeing in the home.

Installing a cat flap into a door panel made of Upvc is a lot easier than a glass door, but it will require some expertise and the appropriate tools.

Take a look at the Door

Installing a cat flap on the door can be a challenge but as long as you select the right kind of cat flap make sure you take your time and follow the directions provided, it should not prove to be too difficult. We will demonstrate how to mark the shape and use an jigsaw to cut the door area. Then, we'll finish the job by affixing the flap. This will ensure that the flap stays in place and shields the door from wind and rain which can cause damage.

The first thing to do is measure the width of your pet in order to determine an accurate estimate of the size of cat flap you will need. This will let you select a cat flap that is big enough to allow your pet to walk into the house and exit without having to open the door every time.

Once you have the measurements, you can mark the location on the door where the template should be positioned, usually, this is done using an X, however some kits come with drawings that show where to drill, if yours does then stick it to the door and draw a line around it. If your door has a sill or moulding at the bottom, be sure you leave enough space between your cat and these elements.

Use a set square to make sure you are cutting correctly and ensure that the hole is a perfect rectangle shape. When you are satisfied with this, you can start removing the rest of the door material. If you own an already-cut square, use it to check that you're cutting properly and to make sure the hole is a good rectangle. Once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without having to worry about them coming in with a visitor, or leaving unwanted gifts in the house. It also prevents drafts and helps to keep the temperature of your home stable. Fitting a cat flap to your door can be a daunting task to those who haven't done it before. upvc door panel cat flap call a professional joiner or carpenter to do the work. While this is certainly an option, it is possible to do the work yourself if you own the proper tools and follow instructions carefully.

It is much easier to do on wooden doors, but it is still possible using uPVC. However upvc door panel cat flap should be cautious not to harm the doors as this could invalidate your guarantee. First, you must measure the door to ensure that it can accommodate the new cat-flap. This isn't too difficult for a standard uPVC door, but you may require extra care if you are using an alternative type of door as these can be more difficult to cut than solid uPVC panels.

upvc door panel cat flap is to determine the height of your belly for your cat. This is the distance from the floor to the lower part of the cat's stomach and you will need to locate a place in the door where this measurement is within the range your cat is able to comfortably walk through. Once you have the information you'll be required to mark the space with a spirit-level and a pencil so you know the opening will fit your cat.

Once you've marked the area, it's now time to cut the hole. It is important to be patient and use a jigsaw ensure that the cuts are smooth and clean not rough and uneven. This could damage your door. Wear safety glasses and a dust mask when working with a Jigsaw. Inhaling sawdust is dangerous for your health. Once you've finished cutting the hole, you'll require sandpaper to smooth the edges so that the cat flap can be easily inserted.

Cut a Hole

Getting a cat flap fitted into an existing door panel or double glazing sealed unit is quite difficult. You may be tempted to do it yourself, but unless have experience with DIY, it's likely to be best to have a professional in to do the task for you. A botched job may not just be ugly, but it could also be an issue for security as well as allowing cold air to enter when the cat is outside and hot air to escape inside.

The first thing you need to do is mark out the position of the hole in the door using an eraser and a spirit level, this will ensure that it is correctly placed and runs in a straight line with the other parts of the door. Make sure to have sandpaper on hand to smooth out any rough edges.

Once the line has been marked you should cut out the hole using a jigsaw. Be sure to wear any necessary safety gear for working with a power tool. If you're worried about noise, you can buy a cordless jigsaw which is more quiet and easy to use.

You should only remove the material required to fit the flap. A little bit of extra material will be required for the thickness of the the flap but removing more than this can cause problems or damage the doors frame.

If the door is made of upvc and has a metal panel or frame, it could interfere with the microchip flap. In this situation, you will need to create an extra-large hole to ensure that the metal does not touch the walls of the flap.

If you're installing a cat flap into a upvc door or double glazed windows with a metal frame, you will need to speak to a professional who can provide you with a new glass pane that already has the hole for the cat flap premade in it. This is less expensive than trying to fit a cat flap in an existing pane of glass that was not designed for this purpose.

Place the Flap

Cat flaps allow your pet the freedom to go and come whenever they like, allowing them to relax at home whenever they'd like. However, if you have an uPVC door, it might be difficult to put in an animal flap, especially when you don't have a glass pane that can be cut to fit one. If you're able to buy and install a replacement half-glazed uPVC panel, it's possible to add a cat flap to the doors. It's not just a matter of cutting a hole into the door. It is also necessary to take a few steps to ensure that the door is safe.

A composite, uPVC, or GRP door panel is generally made up of a thin plastic skin that is attached to an insulating polystyrene base. The material is fairly fragile and care must be taken when cutting through it to avoid causing damage. This type of door usually comes with a template drawing which you can use as a reference to cut the hole in your door.

Once you've marked the opening in your front door, it is time to install the cat flap. You can purchase and install many different models that range from simple push-button operated ones to microchip activated units that allow only your pet. But, regardless of the type of cat flap you choose it's crucial to ensure that your cat can use the flap without becoming stuck outside in the rain.

It's a good idea to choose circular fittings instead of one that is square, since circles are more securely cut into door glass. This is because square holes can make glass more vulnerable to cracking when drilling is applied to it. This is also a safer choice, as you won't have to drill into the toughened glass, which could break and cause harm to your pet or family members. This is particularly important if you have a young or elderly person in your home who could be hurt by shards of glass.
upvc door panel cat flap