Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The revolutionary Ghost immobiliser protects your car from key-long theft as well as relay theft. Your car won't start if someone doesn't know your PIN code.

Transport Mode allows you to temporarily disable the device, which is perfect for servicing and transport in vehicles. It is then activated by entering a pin code again.

No Key Fobs or Indicators with Leds

The Ghost 2 immobiliser offers a powerful defence against modern car-theft techniques. Its invisibility and engine start blockage reduces the possibility of theft, giving you peace of mind as well as saving money on insurance.

It is not detectable by scanners and cannot be hacked with common methods like key cloning and signal jamming. The device uses existing buttons in your vehicle such as those on the steering wheel, door panels, and the center console to generate a unique, changeable PIN code sequence that can be up to 20 presses in length. Only the vehicle owner is allowed to start the engine when the right sequence or beacon or mobile app is employed. This provides an extra layer of protection against thieves.

You can also enable an easy service mode in cases such as valet parking or servicing, which require you to temporarily disable your system. The mobile app makes it simple to do this, while ensuring that your vehicle is safe while being worked on. After the task is completed, it is easy to switch back to secure mode. This ensures that your car is secure throughout the day.

Unlike other immobilisers from the aftermarket that operate with a fob, the Ghost 2 can be operated directly through the vehicles existing buttons, making it more user-friendly than conventional systems. The application can also be used as a backup key in emergency situations. This allows you to drive while having your security off, without having to enter a PIN code.

No Radio Frequency Signals

The Ghost 2 immobiliser is not like other security systems which require a separate remote control. It can be controlled using the buttons that are already on your console or steering wheel. The device is unnoticeable by thieves who use RFID scanning technology or code grabbing, so your car will not start for them if they manage to take your key.

The device employs an exclusive 'password' sequence of buttons that locks the engine. This pin code is entered via the app or pressing the buttons on the steering column and the center console. This will allow you to lock the gear-box too and ensures that your vehicle cannot be driven away unless you have a key or capable of entering your pin code. The device can be set to Transport mode, which allows you to drive the car without having to enter your pin code. This will provide extra protection for your vehicle if it is parked at a valet or service.

The Ghost 2 immobiliser is designed to be a theft deterrent that is as discreet as it can be, making it an appealing choice for those who've spent a lot of money on making their vehicles more unique or have rare or expensive cars. Many have stated that the device is an excellent method to protect their vehicles from being stolen. Some have even told stories of attempted thefts of cars that were foiled by it. The Ghost 2 also offers a wide range of options with many customers reporting that it works with their regular keys to their car as well as with the emergency button on their vehicle, giving them peace of mind when they are away from their vehicle.

No Radio Frequency Scanners

Ghost immobilisers guard your vehicle from key theft and cloning. The system uses the buttons on your dashboard and the steering wheel to create a unique sequence of buttons that you can only recognize. Without this sequence, your vehicle will not start. This combination of a unique disarm sequence and the absence of radio frequency signals makes the device extremely hard to attack or bypass.

In contrast to Thatcham approved devices which rely on radio frequency scanning The Ghost CAN Immobiliser is completely silent and doesn't require any external signals to perform its magic. It is a more secure alternative and is insured if installed by an approved installer of TASSA (we are one of them!) ).

Because of the nature of how the Ghost immobiliser is integrated into your vehicle, it is advised to have an expert installer complete its installation. This will ensure that it is fully connected to the vehicle's systems, leading to optimal performance and a reduced chance of malfunction.

Professional installation is often with warranties and support to enhance the value of your purchase. This is a major deterrent for potential thieves who are less likely than before to attempt to evade the device due to its extensive security features.

The Ghost is not just a great deterrent to thieves, but it's also designed to be easy to use. ghost immobiliser G28 Car Keys can be set to automatically re-arm a certain amount of time after parking your car. This means that you don't have to remember your PIN code every time. It offers a Service/Valet mode when you need to leave your car to valet parking or to service. This can be turned on and deactivated by simple indicator sequence.

No Wire Cutting

The Ghost 2 does not require cutting any wires from your car in order to install it, ensuring a non-invasive integration with your vehicle's original systems. It connects to the CAN data network of your vehicle and is programmed with an unique PIN code. This will prevent anyone else from starting the engine if they don't have a personalised sequence of PINs or app authorisation.

It is also unnoticeable by the specialised scanning tools that some thieves use and is silent because it doesn't transmit radio signals like other immobilisers. It is weatherproof, sealed and small enough to be hidden anywhere within the vehicle.

The Ghost II also has the possibility of being switched into 'transport mode which allows it to be used for short durations of time without the need for an individual PIN. This is great for situations like giving the car to a family member, or in an emergency. You can start your vehicle quickly and securely.

When installing the Ghost II, it's important to work in a well-lit area and wear protective gear when working with electrical and tool components. A basic set will allow you make precise connections. A multimeter will allow you to verify electrical values, and make sure that your wiring is secure. Insulation tape and cable ties can be used to secure or join any exposed or cut wires that are exposed during the installation process.

It is also essential to disconnect the battery before trying any wiring work on your vehicle. This will stop any airbag deployments and electrical shocks in the event that the Ghost II is connected to the vehicle's system while the battery is disconnected.

Easy to Install

The Ghost immobiliser, a distinctive device of the next generation, operates by directly connecting to your vehicle's CAN Data Network. It uses a personalised pin code to block it from starting. This makes it more difficult to crack than standard key fobs or alarm systems and offers superior security against key cloning hacking, and relay attacks.

The unit can be concealed inside your vehicle. it makes use of the buttons on your dashboard and steering wheel to create a unique sequence you only know. This stops thieves from being able use a cloned key to start your vehicle. It also prevents them from using the diagnostic tool that thrives on hacking into the OBD.

Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus through an unchanging 12V supply and a grounding connector. Hand tools of a basic nature are sufficient to install the unit, and a multimeter will help with pinpointing the correct wires. Insulation tape or heat shrink tubing is recommended to shield the connections and cable ties can be used to keep the wiring tidy and organized.

After installation, the unit enters into a learning mode that will record your individual buttons or sequences to create your own unique pin code. This information is later stored in the CAN data network, making it virtually impossible for anyone else to replicate your sequence and start your vehicle.

If you forget your PIN Code or sell your car, or a button become inoperative there is an emergency override option called Transport Mode. This will shut down the Ghost system completely, but it will reactivate automatically when you reach 31mph for more than 15 minutes or you enter your PIN Code. This is ideal for those who regularly rent out their vehicles through services such as Turo or ZipCar.
ghost immobiliser G28 Car Keys